This ad will close in 15 sec
Tags
Horizontal Directional Drilling
Industry News

HDD virtual reality simulator developed by Ditch Witch to improve training and safety

Operators can use the new Ditch Witch-developed VR training simulator to improve safety and efficiency on the job site.
Operators can use the new Ditch Witch-developed VR training simulator to improve safety and efficiency on the job site.

More than 50 percent of reported underground utility damages are the result of insufficient excavation practices according to the 2017 DIRT Report. The Ditch Witch organization, a Charles Machine Works Company, has introduced an industry-first Virtual Reality (VR) Simulator to better prepare horizontal directional drill (HDD) operators for safe underground construction through cutting-edge training technology. 

"Our next-generation HDD VR Simulator takes training to the next level by allowing operators to familiarize themselves with HDD equipment and experience a realistic jobsite without the potential risks of putting a novice operator in complex environment," said Greg Wolfe, Ditch Witch director of training. "Combined with our comprehensive Certified HDD Training curriculum, the simulator provides operators with the proper training to safely and effectively complete an HDD jobsite project, without the pressure of consequences from mistakes."

As the industry's first simulator utilizing VR technology, it provides both novice and experienced HDD operators with a 360-degree view of a realistic jobsite - simulating a variety of soil conditions and installation applications so operators can learn how the drill reacts. Through a series of lessons that increase in difficulty, operators are evaluated and educated on machine functions, product location, damage prevention, extended bend radius and steering. The program emphasizes damage prevention by requiring operators to preplan, set up equipment correctly and test protective systems.

The full VR simulator kit includes a portable operator station, joystick, dongle, lead motion detector sensor and VR goggles. To truly simulate a real jobsite experience, the equipment is configured to replicate what operators see and feel, leveraging the same joysticks found on Ditch Witch HDD equipment. 

HDD contractors and education centers looking to incorporate the latest HDD training technology into their program can purchase the simulator at their local Ditch Witch dealership.

Company Info

Latest News

Tags
Industry News

HammerHead Trenchless training facility up and running

The new two-story, 5,000-square-foot educational facilities provide trenchless method contractors, plumbers, project engineers and utility company and municipal crews both classroom and hands-on application training for every HammerHead product line.

The first class of contractors to graduate from HammerHead University, the world's most advanced trenchless technique learning centre, received manufacturer certification after three days of hands-on, guided instruction. The training facilities and curricula had been officially announced as fully operational at the Lake Mills, Wisconsin, headquarters of HammerHead Trenchless, a Charles Machine Works company, during its annual August sales meeting.

Read More

Toro Dingo TXL 2000 boasts telescoping arms and 2,000-pound capacity rivalling small CTLs and SSLs

Newest machine boasts innovative telescoping loader arms, 2-ton rated operating capacity.

Representing a continuation of 20 years of innovation in the compact utility loader (CUL) equipment category, Toro introduces the all-new Toro Dingo TXL 2000. The latest model features telescoping arms to allow the TXL 2000 to reach over obstacles, dig below grade, and generally extend the operator's working range. This equipment solution consolidates the benefits of several machines into one to perform a variety of tasks on the jobsite.

Read More

Sponsored Content

Are all excavators the same?

Among the top brands, many believe all excavators are the same. But when you look closely, you can spot the small differences in design that add up to huge differences in productivity and efficiency — differences that can boost your profitability. 


Read More

In-depth report: compact excavators

The reputation of the compact excavator has been significantly bolstered in recent years due to their growing versatility and the range of options available for these machines. As hydraulic capabilities improve, the scope of these machines' capabilities has moved beyond earthmoving in cramped quarters and on small jobs. The compact excavator has become a multifunctional machine that can meet a variety of needs, from flail mowing to precision excavating. 

Read More

Tags
Industry News

Sanexen successfully finishes NYC tunnel repairs in record time

Sanexen successfully finishes NYC tunnel repairs in record time

During the weekend of October 20th, Sanexen Water, Inc., a member of the LOGISTEC family, successfully completed major repairs in the Lincoln Tunnel in New York City with minimal impact. When the Port Authority of New York and New Jersey (PANYNJ) began planning repairs and upgrades to Route 495 and the Lincoln Tunnel, one of the requirements was to repair two cast iron cement-encased water main sections at each end of the tunnel that supply water for fire prevention.  Sanexen Water was selected for its unparalleled expertise and its innovative Aqua-Pipe trenchless technology, to repair these aging water mains while other construction work was in progress. New trenchless technology is used for the replacement or rehabilitation of existing underground infrastructure with minimal excavation and disruption to surface traffic. 

Read More

Tags
Locating, Inspection

Pole camera from CUES lightweight, portable and wireless

CUES has developed a new lightweight, portable, wireless digital video inspection pole camera that can be operated by one person. The new QuickZoom III (QZIII) camera is designed to provide cable-free safe-viewing in industrial or environmental areas with no man entry. Perform swift inspections and surveys of pipelines, wet wells, manholes, sewer treatment plants, steam generators, tanks, vessels, and other areas that are difficult to reach. QZIII can also be used to locate lateral services or to identify blockages at manholes, access ports, or other entry points without entering the line or structure.

Read More

Tags
Tunneling

Robbins TBM breaks through on long, tough Atlanta bore

On October 4, 2018, onlookers watched as a 3.8 m (12.5 ft) diameter Robbins Main Beam TBM completed its epic journey. The TBM, christened "Driller Mike", after local rapper and activist "Killer Mike", overcame extremely hard rock conditions along a curving 8.0 km (5.0 mi) tunnel to bolster the city of Atlanta, Georgia, USA's water supply. 

Read More

Tigercat street trencher cuts, pulverizes and fills in one pass

On average, the TigercatT 726G street trencher can produce approximately 76 metres (250 feet) of trench in half an hour at widths from 46 to 61 cm (18 to 24 inches) and up to 51 cm (20 inches) deep.

Traditional methods for trenching on asphalt or concrete roads require trucking away chunks of asphalt and concrete after it has been cut, and then obtaining additional material to backfill the trench to complete the work. The Tigercat T726G street trencher is an ingenious machine that eliminates those steps.

Read More

Tags
Industry News

Bold black-and-red "Modern Hex" design to adorn Cat equipment by 2020

Cat machines will have new flair as Caterpillar introduces the

Cat machines, engines, generator sets and work tools will soon have a new look. Caterpillar is replacing the current "Power Edge" trade dress (Cat trademark on a black background accented with a diagonal red bar) with a fresh new graphic design called "Cat Modern Hex." The Cat Modern Hex design combines the traditional Cat trademark and product model names with a bold, three-dimensional red hexagon and grille pattern. The red color is a throwback to the graphics used on the company's very first crawler tractors in 1925.

Read More

Tags
Locating, Inspection

CUES launches new pipeline inspection tool

CUES has developed a new pipeline inspection tool designed to significantly reduce unplanned downtime. The CUES REDI (Remote Evaluation Diagnostic Inspection) Kit is the first pipeline inspection troubleshooting kit available on the market today designed to help diagnose electrical issues, allowing for quicker and more accurate troubleshooting and repairs of problems while in the field. The release of this new product reflects CUES continuing commitment to offer the best customer support services in the business.

Read More

Tags
Locating, Inspection

Cansel acquires Trenchless Utility Equipment precision locating business

Cansel acquires Trenchless Utility Equipment precision locating business

Cansel, a software, hardware, and service provider to engineering, surveying, construction, architecture, government and printing industries announced today that it has acquired the precision location business of Trenchless Utility Equipment Inc. in Ontario and Alberta.  First established in 1992, Trenchless Utility Equipment Inc. was formed to specialize in the relatively new Horizontal Directional Drill Industry. Over the years the company has become a leader in protecting underground utility infrastructure. 

Read More

Microtunneling taps fresh water for B.C. project

John Hart Lake, near Campbell River on Vancouver Island, has for decades provided the people of British Columbia with electrical power and local residents with a generous source of clean, fresh water. However, an aging facility meant that BC Hydro needed to upgrade the John Hart Generating Station, which left the nearby city to rethink its drinking water source. 

Read More

Tags
Horizontal Directional Drilling

Ditch Witch updates fluid management systems to improve HDD productivity

Ditch Witch has updated its water management systems to improve efficiency in horizontal drilling operations.

The Ditch Witch organization, a Charles Machine Works Company, has updated its line of fluid management systems to increase productivity and reduce costs on horizontal directional drilling (HDD) jobsites. These advanced models incorporate new design features to meet the highest standards for jobsite productivity, improved drilling fluid flow, increased durability, and faster mixing cycles and yield times.

Read More

Tags
Tunneling

Robbins TBM breaks through on Ohio Canal project

On August 29, 2018, a 9.26 m (30.4 ft) diameter Robbins Crossover (XRE) TBM crossed the finish line at the Akron Ohio Canal Interceptor Tunnel (OCIT). A press day followed on September 5, where companies and members of the media were invited to view the giant machine. The machine — dubbed "Rosie" in honor of Rosie the Riveter, an icon representing American women who worked in factories and shipyards during World War II — overcame tough ground conditions during the bore.

Read More

In-depth report: Horizontal directional drilling

Installation of underground infrastructure has become more challenging in today's sprawling urban centres. For many types of utility and service, the need to dig under existing roads, buildings and other obstructions has brought a growing interest in horizontal directional drilling.

Read More

Tags
Industry News

New, innovative directional drill package released by Ditch Witch

The new JT20XP drill package utilizes all onboard horsepower for thrust and rotation.

Ditch Witch, a Charles Machine Works Company, released a new JT20XP horizontal directional drill (HDD) package featuring a JT20XP drill and XP44 mixing system. The industry-first solution is the only drilling system in its class to utilize all on-board horsepower for thrust and rotation. Together, the full 118-hp solution provides operators industry-leading power and superior productivity for larger utility-installation jobs. 

Read More