Canadian Underground Infrastructure Logo

Vermeer's new Navigator horizontal directional drill designed to deliver in rocky, congested environments

The Vermeer Firestick® drill rod dual system onboard the D23x30DR S3 gives operators a seven percent downhole steerability.
The Vermeer Firestick® drill rod dual system onboard the D23x30DR S3 gives operators a seven percent downhole steerability.

Company info

1210 Vermeer Road East
Pella, IA
US, 50219

Website:
vermeer.com

Read more

Related products

The new Vermeer D23x30DR S3 Navigator horizontal directional drill (HDD) integrates dual-rod technology into a compact machine design to efficiently maneuver through rock in congested cities, busy neighborhoods or tight jobsites. Featuring a class-leading narrow footprint and a weight of 16,500 pounds (7,484 kg), the D23x30DR S3 is the lightest rock drill on the market and is well suited for fibre, electrical, gas and water installation in hard rock, as well as other challenging ground conditions.
 
The Vermeer Firestick drill rod dual system onboard the D23x30DR S3 gives operators a seven percent downhole steerability. The unit's threaded outer rod has a rotational torque of 3,000 foot-pounds (4,067.5 Nm), while its hex inner rod delivers up to 800 foot-pounds (1,084.6 Nm). The D23x30DR S3 is powered by a Deutz TCD3.6L4 diesel engine and a thrust/pullback of 24,000 pounds (106.8 kN).

New rock tooling for the D23x30DR S3 helps further enhance its performance and productivity in rocky ground conditions. The Vermeer RH10 drill head provides responsive downhole steering with a two-degree bend located in its forward section. The drill head can be fitted with a 5.5-inch (14-cm) tricone bit or polycrystalline diamond compact (PDC) bit that is greaseable and can be rebuilt in the field. Vermeer also offers the new toolless PG5 quick pullback grapple mounted over the top of the RH10 drill head and tricone bit to help reduce the need to remove the drill head after the pilot bore when installing small-diameter pipes.
 
"For utility installation work in rocky soil conditions, HDD contractors traditionally had to choose between using a larger horizontal directional drill, bringing in more equipment so they could use an air hammer or go slowly and potentially sacrifice productivity," said Tod Michael, product manager of trenchless products for Vermeer. "The new D23x30DR S3 is a better option for doing small-diameter installation bores in rocky ground conditions. Its narrow profile and light footprint allow it to fit in small or congested areas and helps reduce risk of damaging sidewalks or turf while maneuvering the drill into position. Also, the new PG5 quick pullback grapple helps reduce the labour involved in removing a drill head before pullback."
 
As part of the Vermeer S3 Navigator HDD series, the new D23x30DR S3 delivers on speed, simplicity and sound. The drill has a carriage speed of 175 feet per minute (53.3 m/min) and a rotational speed of 200 rpm. The operator's station combines familiar, convenient-to-use controls with the latest dual-rod advancements through the use of controller area network (CAN) technology, which also provides onboard diagnostics and a reduced amount of wiring and fuses. Additionally, the D23x30DR S3 has an operator ear noise level of 83 db(A) for a quiet working environment for the crew and the surrounding neighborhood.
 
The D23x30DR S3 is Vermeer Fleet–ready and convenient to service. When activated, Vermeer Fleet provides contractors with even more productivity features, including fault recognition, geofencing, fuel usage and more. When it is time to service the machine, a large rear hood offers convenient access to the mud pumps and other service points, while the open-top vice makes it convenient to change out die with rod in vice and have visibility of the joint.

More from Horizontal Directional Drilling

HDD virtual reality simulator developed by Ditch Witch to improve training and safety

More than 50 percent of reported underground utility damages are the result of insufficient excavation practices according to the 2017 DIRT Report. The Ditch Witch organization, a Charles Machine Works Company, has introduced an industry-first Virtual Reality (VR) Simulator to better prepare horizontal directional drill (HDD) operators for safe underground construction through cutting-edge training technology. 

Ditch Witch updates fluid management systems to improve HDD productivity

The Ditch Witch organization, a Charles Machine Works Company, has updated its line of fluid management systems to increase productivity and reduce costs on horizontal directional drilling (HDD) jobsites. These advanced models incorporate new design features to meet the highest standards for jobsite productivity, improved drilling fluid flow, increased durability, and faster mixing cycles and yield times.

Radius HDD Over-Bit Reamer

Designed and tested with the help of small bore contractors, the Radius HDD Over-Bit Reamer easily attaches to an existing rock bit without breaking a single connection. The Radius Over-Bit Reamer only needs 16 inches of clearance. With the pilot tool still attached, the sonde can be used to track progress through tight easements during pullback. The Radius Over-Bit Reamer is available in 6- and 8-inch sizes with a variety of cutting styles.

Vermeer and Mincon form distribution alliance for rock tools

Two of the horizontal directional drilling (HDD) industry's leading equipment and tooling manufacturers, Vermeer Corporation and Mincon Group PLC, have formed a distribution alliance to expand contractors' access to quality rock tooling worldwide. As part of the agreement, Vermeer dealers are now the exclusive channel for Mincon HDD air hammer systems, HDD pull reaming hammers and HDD support equipment, including HDD support stations and oilers.

free-paper-airplane

Get our newsletter

Learn more

Vermeer D8x12 HDD provides compact productivity

Vermeer expands its line of utility installation equipment with the launch of the D8x12 Navigator horizontal directional drill. This new compact and highly productive drill is sized for working in tight spaces, features straightforward controls and delivers quiet operation. With two drill rod options for added versatility, the Vermeer D8x12 is well suited for small service installations, including gas distribution, power, water and telecommunication networks.

Online parts lookup tool aids Ditch Witch customers

The Ditch Witch organization, a Charles Machine Works Company, has released an advanced version of their industry-first, web-based tool that helps customers be more efficient and reduce downtime by quickly finding the service parts they need. The Ditch Witch Parts Lookup gives customers easy access to detailed parts information and a direct line of communication to dealerships for part verification and pick-list creation.

Miami Beach HDD installation recognized as Plastic Pipe Institute's Project of the Year

The longest horizontal directional drilled (HDD) installation of high-density polyethylene (HDPE) pipe in the United States and Canada was recognized as Project of the Year by the Plastics Pipe Institute, Inc. (PPI). The award was presented to PPI member company ISCO Industries at the association's annual membership meeting in May 2017. PPI is the major North American trade association representing all segments of the plastic pipe industry,

Pit-launched mini directional drill

TT Technologies' redesigned Grundopit pit-launched mini directional drill is well suited for difficult fiber-to-the-home and utility service line installations in tight working conditions. The unit is compact, 54 inches long, 43 inches wide and 57 inches tall. The Grundopit delivers 13,489 lbs. of thrust and pull back and 553 ft. lbs. of torque with bore length up to 150 feet. The Grundopit is an ideal entry-level system for utilities, cable industries or as a supplement to larger units.

Robust fluid cleaning system offers small footprint and quiet operation

Pipeline and utility contractors attending the 2017 International Utility and Construction Equipment Exposition (ICUEE) in Louisville, Kentucky, were first to see the newly released American Augers M-300D HDD fluid cleaning system. Based on American Augers' successful, highly portable M-200 platform, the M-300 system's small trailer size lowers registration and excise tax requirements while supporting any make of 60- to 100-ton drill unit with a true 300 gpm fluid-cleaning capability. 

HammerHead Trenchless launches remote-controlled 22-ton winch at ICUEE

HammerHead Trenchless, a Charles Machine Works company, introduced its new 22-ton, radio remote-controlled HydroGuide® HG2200 cable winch at the 2017 International Construction and Utility Equipment Exposition (ICUEE) in Louisville, Kentucky. The HG2200 completes the HammerHead line of next-generation winches designed for maximum efficiency and ease-of-use in pipe-bursting, slip-lining and pipe-slitting applications.

Ditch Witch offers next generation AT40 all terrain directional drill optimizes downhole performance in hard rock

To enhance utility contractors' efficiency while drilling and steering in hard rock, Ditch Witch, a Charles Machine Works Company, has released the new AT40 All Terrain horizontal directional drill (HDD). The machine features an advanced, two-pipe All Terrain drilling system that provides 33 percent more torque than competitive units.  The newly optimized All Terrain drilling system includes multiple patent-pending designs that improve downhole operation. An inner-rod design provides a flush system that improves tool-joint durability and steering in hard rock conditions. To further improve steering and optimize fluid flow, a reliable All Terrain connection reduces the risk of collar damage. 

DITCH WITCH unveils enhanced, next generation underground construction equipment, parts and technology at ICUEE

The Ditch Witch organization, a Charles Machine Works company, is planning to unveil a wide variety of new and enhanced underground construction equipment, parts, tools, and technology—all designed to boost productivity at the International Construction and Utility Equipment Exposition (ICUEE) Oct. 3-5 in Louisville, Kentucky. 

free-magazine-subscription

Get Our Magazine

Paper or Digital delivered monthly to you

Subscribe or Renew Learn more

Major upgrade for HDD hammer system

The spring 2017 acquisition of Armadrillco solidified StraightLine HDD's position as a leader in hard condition tooling. The announcement today of the adaption of the patented Armadrillco transmitter housing to the RockEye Hammer System is a significant step in diffusing Armadrillco technology throughout StraightLine HDD tooling platforms.

Keys to a smooth running HDD operation

Success in the HDD business is about more than boring a stable hole and completing a successful pullback. It's about running your entire HDD operation like a well-oiled machine. Here are five ways we've seen successful HDD companies make businesses function more smoothly and create lasting success, followed by an example of what to look for in on specific type of tool, the backreamer. 

Performix Mixer Upgrade Announced

StraightLine HDD, Inc. announced the implementation of an upgrade to its popular Performix Mud Mix System. At the heart of the Performix System is the centrifugal pump, which generates the best laminar flow in the industry. The performance pump now features an upgraded silicon-carbide shaft seal. Compared to traditional ceramic seals, the new seal represents a considerable advancement in resiliency when subjected to the highly abrasive elements present in mud mixing. In field testing, silicon carbide seals improve service life by a factor of three,over ceramic seals.

Vermeer Introduces Silver Series Drill Rod

Vermeer has bolstered its  line of HDD tooling and accessories with the addition of the Silver Series drill rod. Building on the tradition of it's acclaimed Firestick drill rod, Silver Series drill rod gives contractors a quality aftermarket drill rod at an economic price.

Ditch Witch Launches JT10 HDD Rig

Ditch Witch has introduced the JT10 horizontal directional drill (HDD) providing operators with exceptional power in a compact, reliable platform. For superior productivity, the machine incorporates advanced features found on larger units while remaining the most compact drill in its class.

free-paper-airplane

Get our newsletter

Learn more

Ditch Witch boosts drill power with JT60 and JT60 all-terrain HDD Tier 4 upgrades

Today’s horizontal directional drilling (HDD) operators face plenty of challenges on large installation projects, including difficult terrain and tough soil conditions. To provide operators with the power and performance to conquer any job, Ditch Witch has introduced Tier 4 emission standard upgrades to the JT60 and JT60 All Terrain directional drills.

Extend your mud recycler’s lifespan

Equipment maintenance is a topic that no contractor particularly wants to address, but in light of the ever growing need to maximize production and cut down time it is extremely important. Your equipment will only continue to work properly if you take the time to perform simple routine maintenance.

Cross bore problem in the crosshairs

They are two words no contractor or municipal engineer wants to hear: cross bore. A cross bore is what happens when one underground utility intersects another. Most worrying is when a gas line punches through a sewer main or lateral. Cross bore risk has risen with the use of trenchless technologies like horizontal directional drilling, because the operator can’t physically see what’s in the immediate vicinity of the drill bit.

free-magazine-subscription

Get Our Magazine

Paper or Digital delivered monthly to you

Subscribe or Renew Learn more