Canadian Underground Infrastructure Logo

What lies beneath? Locating tools take the mystery out of buried utilities and underground obstacles

0167/41732_en_2cc72_44455_subsite-2550gr-gpr-dp.jpg

Company info

1950 W. Fir Ave
Perry, OK
US, 73077

Website:
subsite.com

Read more

1210 Vermeer Road East
Pella, IA
US, 50219

Website:
vermeer.com

Read more

PO Box 313
Matawan, NJ
US, 07747

Website:
usradar.com

Read more

12 Industrial Way
Salem, NH
US, 03079

Website:
geophysical.com

Phone number:
603-893-1109

Read more

1040 Stacey Court
Mississauga, ON
CA, L4W 2X8

Website:
sensoft.ca

Read more

Utility locating tools and GPR systems are vital pieces of equipment to aid contractors in mapping out buried utilities and underground obstacles. We asked experts from Subsite Electronics and Vermeer MV Solutions what to look for when choosing a utility locating tool or GPR system so that you can have the most accurate information the next time you dig.

Key features for accurate results
According to Jake Jeffords, director of marketing and global accounts, Vermeer MV Solutions, "To get the best results in a variety of environments, contractors should choose a locator with multiple frequencies." The benefits of different frequencies depends on the type of locator.

Don Dillon, key account sales manager for Subsite Electronics, said that "low-frequency options provide the most accurate results and high-power transmitters also enhance low-frequency performance. A transmitter with multi-meter devices also provides a key component (Amp/Volt/Ohm) which is used to determine any issues with the utility itself (e.g. opens, shorts) and is ultimately used to decide if a utility is locatable or not."

"Multiple-frequency locators allow the operator to adjust the frequency to the type of line they are trying to locate," Jeffords said. "Locating at a lower frequency reduces the chance the receiver will pick up a signal from a nearby line, allowing for a more accurate locate of the correct line. Multiple frequency locators are ideal for crowded underground conditions." 

According to Dillon, Subsite Electronics' Ambient Interference Measurement (AIM) feature will determine if there is any outside interference such as power lines (overhead or buried) or towers, radio towers, cell towers, microwave towers, or other utility locators using the same active locate frequency. He noted that interference is a common problem with locators and often is not and cannot be detected by most locators. 

"Failure to identify interference is a key reason for mislocates and damages," Dillon said. "Multi-frequency locators provide solutions to many forms of interference."

Dillon also noted a number of advantages to GPR systems. "GPS connectivity allows you to see your path and marks in real-time as you scan, and the wireless connection allows you to download maps such as Google Earth." 

He added that a GPR system locates both metallic and non-metallic pipes and cables to allow one-pass locates at depths up to 19.7 feet, depending on soil condition, and a dual-frequency antenna simultaneously sweeps in two frequencies; this allows the operator to see both deep and shallow objects simultaneously.

Durability is also very important, according to Jeffords. The utility locator needs to be able to withstand tough jobsite conditions. "Durability is key because contractors take equipment in and out of a truck on a daily basis and, unfortunately, the locator may not be handled with absolute care."

Ground conditions
According to Dillon, "Ground conditions can have a dramatic effect on utility locators. Drier soil conditions (such as sandy soil) result in poor ground conditions which result in higher impedance which in return affects the locator performance greatly."

Jeffords said that ground conditions can be a concern during passive locating (a general sweep of the area). "Passive locating should only be employed at the beginning of a project to scan the jobsite for utilities where access points are unknown and as a final step after utilities are located to ensure no utilities were missed," he said.

"For best results, operators should perform active locating by directly connecting to the utility being located."

Training
"The typical training process would consist of understanding the basics of signals and frequencies. Most multi-frequency utility locators have similar functions, but understanding the ‘101 Basics' makes a difference in the output of success," said Jeffords.

According to Dillon, most utilities and contract locating companies have stringent training and test procedures. "Training for utility locators generally involves one to three weeks of informal classroom training (theory, best practices and [Dig Safe] guidelines), followed by several weeks of field training which in many cases involves additional field training with a mentor."

Jeffords added, "Just like any technology, having someone use the same device over and over will give the operator more confidence in an accurate locate which in turn will make the entire jobsite safer and more productive." 

Subsite Electronics UtiliGuard 2
The UtiliGuard 2 combination of automatic real-time data capture, performance analytics information and integrated GPS provides oversight/proof of locator field activity to improve work quality, accuracy and reliability of locate activities; ensures compliance with company standard operating procedures and performance expectations; and enables the creation of initiatives that can decrease utility strikes and increase productivity.

Apple and Android apps securely transfer data back to the office from the field for immediate availability and wireless locator configuration management and software updates minimize downtime and maximize performance.
Automatic integrated data capture provides information that can be used to prove or track performance, compare with benchmarks and provide actionable outcomes to help increase quality, reduce cable strikes and increase productivity across multiple crews.

Vermeer Verifier G3
With the Verifier G3, users can expect a durable design with antennas mounted in rubber isolators to stand up to the toughest conditions. In addition to the separate peak and null locating screens found on the previous models, the G3 features a combination screen eliminating the need for toggling between screens.

Dual functionality allows users to engage the semiautomatic gain on congested, urban jobsites where signal distortion is a common challenge, and use the manual gain method when working in less congested areas.

An automatic depth and current measurement index (CMI) has been added. When the user is over a utility line, instead of having to press a button, the estimated depth and CMI will be automatically displayed.

A compass icon provides a straightforward visual representation of a utility's position in reference to the receiver. The icon simplifies the locating process by automatically calculating peak signal and quickly informing the user of the direction of the utility path.

US Radar GPRover
With no base station or control points required, a utility locator can use the GPRover to collect high-accuracy data within +/- 1 inch (5 cm) and map findings in real time. This results in an instant deliverable that can serve as a common point of reference for subsurface infrastructure installation and maintenance contractors.

The GPRover combines the only true triple-frequency range GPR antenna on the market with global GPS integration powered by John Deere's Navcom Starfire system.

While scanning, the antenna emits three separate signal ranges at low-, medium- and high-frequency outputs. This generates three unique datasets simultaneously that can be analyzed and cross-compared for further accuracy. The operator can image, map or export findings as multiple file types for future use.

The GPRover features patented tilt-correction technology that automatically compensates for slope and cross-slope of the GPR and GPS antennas to increase overall accuracy. The GPR antenna also auto-calibrates to surrounding soil conditions to reduce signal loss as much as possible.

Field data collected by the GPRover may be saved and exported in most common file formats. Using advanced post-processing software, the user can also create 3D images of their data or map findings through third-party platforms like Google Earth.

GSSI UtilityScan
UtilityScan is ideal for efficiently identifying and marking the location and depth of subsurface features. With a robust new wireless 350 MHz antenna that can handle required data rates, UtilityScan is ruggedly built to withstand challenging field conditions. UtilityScan uses patented HyperStacking technology for unparalleled data quality and has an integrated LineTrac system. It works up to maximum depths of 10 metres (35 feet). 

Fully integrated, the SIR 4000 control unit on display provides a 10.4-inch high-definition LED display, a simple user interface, plug-and-play GPS integration, and Wi-Fi enabled data transfer functionality. Exclusive features include a casted aluminum chassis that offers superior temperature stability and an impact-resistant design that combined delivers a full IP 65 rated unit, which stands up to tough jobsite conditions.

Sensors & Software LMX
Sensors & Software Inc. has released new data acquisition software for LMX100 and LMX200 GPR systems. LMX systems now have four more predefined filter levels to remove flat-lying reflections and increase the detectability of hyperbolic responses from utilities.

DynaT, the company's Dynamic Target enhancement features that optimized views of small, medium and large targets, previously only available in the LMX200 is now on the LMX100.

New features have been introduced for the LMX200. Obstacle Avoidance guides the user through collecting a grid around an obstacle. Add flags during grid data collection and display interpretations on depth slices in the field. There are also new MapView enhancements offering a more powerful and meaningful bird's eye view of the survey site displaying depth slices from multiple grids simultaneously.

New features for LMX200 users with an external GPS include SplitView Real-time LineView and MapView displays on one screen. New MapView enhancements include a real-time position indicator so users know where they are in the survey area with respect to the targets found and marked with field interpretations and flags.

More from Locating, Inspection

Data and GPS capabilities now offered on Subsite UtiliGuard locating system

Subsite Electronics has introduced the UtiliGuard 2, a new multi-frequency utility locator based on the popular UtiliGuard system. Available in Standard and Advanced models, UtiliGuard 2 takes all the proven performance-boosting features of the original UtiliGuard and adds several important new capabilities including an all-new user interface, integrated data capture, and GPS positioning.

Pole camera from CUES lightweight, portable and wireless

CUES has developed a new lightweight, portable, wireless digital video inspection pole camera that can be operated by one person. The new QuickZoom III (QZIII) camera is designed to provide cable-free safe-viewing in industrial or environmental areas with no man entry. Perform swift inspections and surveys of pipelines, wet wells, manholes, sewer treatment plants, steam generators, tanks, vessels, and other areas that are difficult to reach. QZIII can also be used to locate lateral services or to identify blockages at manholes, access ports, or other entry points without entering the line or structure.

CUES launches new pipeline inspection tool

CUES has developed a new pipeline inspection tool designed to significantly reduce unplanned downtime. The CUES REDI (Remote Evaluation Diagnostic Inspection) Kit is the first pipeline inspection troubleshooting kit available on the market today designed to help diagnose electrical issues, allowing for quicker and more accurate troubleshooting and repairs of problems while in the field. The release of this new product reflects CUES continuing commitment to offer the best customer support services in the business.

Cansel acquires Trenchless Utility Equipment precision locating business

Cansel, a software, hardware, and service provider to engineering, surveying, construction, architecture, government and printing industries announced today that it has acquired the precision location business of Trenchless Utility Equipment Inc. in Ontario and Alberta.  First established in 1992, Trenchless Utility Equipment Inc. was formed to specialize in the relatively new Horizontal Directional Drill Industry. Over the years the company has become a leader in protecting underground utility infrastructure. 

Robust, cost-effective downhole inspection camera from Hoskin

The dipper-See EXAMINER from Hoskin Scientific is a robust and cost effective vertical downhole inspection camera. Designed with portability in mind, this self-contained unit is ideal for viewing in wells, drains, vertical shafts, open bodies of water, boreholes and narrow tubes over 25mm (1") in diameter.

  • Versatile positioning arm
  • High Definition (HD) display screen
  • HD, detachable See-120 camera probe
  • Recordable video/audio
  • Designed to work in the harshest environments
  • Built in hanger - hands-free viewing while in the field

Latest in ground penetrating radar on display at World of Concrete

GSSI, the world's leading manufacturer of ground penetrating radar (GPR) equipment, will be highlighting its latest GPR technology at the 2018 World of Concrete conference, to be held January 23-26, 2018, at the Las Vegas Convention Center in Las Vegas, Nevada, Booth #C3719. On display will be a new affordable UtilityScan GPR System, StructureScan Mini XT all-in-one concrete inspection GPR system, and the new Palm XT miniaturized GPR antenna for the StructureScan Mini XT. 

Subscribe to our free newsletter

Get our newsletter

Learn more

New Sentinel Portable Inspection System

The new Sentinel Inspection System, from Aries Industries, Inc., is an integrated system with all components operated by an all-in-one controller. The compact, portable unit combines a lightweight reel, a quick set-up tractor and a state-of-the-art camera.

Subsite Electronics acquires R.S. Technical Services

Subsite Electronics, a Charles Machine Works Company, has announced the acquisition of the assets of R.S. Technical Services, Inc. (RST), an innovator in the design and manufacture of closed-circuit television remote inspection and monitoring cameras. The deal adds proven camera inspection capabilities to Subsite's robust line of Underground Awareness solutions.

multiVIEW opens Kitchener office to expand service coverage across Southern Ontario

multiVIEW Locates Inc. a professional services firm that specializes in locating and mapping buried infrastructure has announced the opening of its’ fourth office location in Kitchener, Ontario.  The new location will allow multiVIEW to quickly deploy to deliver private and public utility locating services across the city and surrounding area, bridging the gap between the company’s existing Mississauga and London-based offices.

The Smarter Way to Locate

The Vermeer Verifier™ G3 utility locator by McLaughlin combines trusted precision with a user-friendly interface. Contractors face congested underground conditions, unmarked utilities and increasingly strict regulations, making accurate, timely locating more important than ever.  The Verifier G3 features include a combination peak and null screen, semiautomatic and manual gain adjustment, and automatic depth and current measurement index. The new compass icon simplifies the locating process by automatically calculating the peak signal and informing the user of the direction of the utility path. With the Verifier G3, users can expect the same core qualities of the Verifier G2 including: a durable design with antennas mounted in rubber isolators to standup to the toughest jobsite conditions and the exclusive McLaughlin three-year warranty and weather-proof guarantee. Users new to the locating profession will appreciate the streamlined design and simple interface; advanced operators have the option to capitalize on some of the industry’s most advanced locating technology — all in one device.  

GSSI announces flexible, configurable ground penetrating radar system for utility detection

GSSI, a leading manufacturer of ground penetrating radar (GPR) equipment, announces the release of the UtilityScan Pro, the latest addition to the company’s popular UtilityScan GPR product line. UtilityScan systems are the industry standard for efficiently identifying and marking the location and depth of subsurface utilities, including gas, sewer, and communication lines. Featuring the SIR 4000 control unit, the UtilityScan Pro delivers the configurability and flexibility to address a wide range of utility applications.

multiVIEW opens new office location to meet growing demand across Southwestern Ontario

multiVIEW, a leading professional services firm that specializes in locating and mapping buried infrastructure is pleased to announce the opening of its London, Ontario office. The strategically situated office location will allow multiVIEW to complete local contract-based work and quickly deploy to meet growing demand across Southwestern Ontario for utility locating, hydro-excavation and CCTV camera inspection services.

New guidelines for utility relocations

Utility relocations typically present one of the largest potential risks to delivering major capital infrastructure projects on time or on budget within urbanized areas. Until now there has been little in terms of a standardized process in place regarding the coordination of the utility impacts and the management of the effects of the utility relocations on a project.

Cross bore problem in the crosshairs

They are two words no contractor or municipal engineer wants to hear: cross bore. A cross bore is what happens when one underground utility intersects another. Most worrying is when a gas line punches through a sewer main or lateral. Cross bore risk has risen with the use of trenchless technologies like horizontal directional drilling, because the operator can’t physically see what’s in the immediate vicinity of the drill bit.

Subscribe to our free magazine

Get Our Magazine

Paper or Digital delivered monthly to you

Subscribe or Renew Learn more

Cost-effective site sampling tools for environmental assessments

Geophysical surveys can be the bedrock (pardon the pun) of today’s environmental projects, from locating abandoned underground storage tanks (USTs) and utilities, to complex mapping of geology in remedial investigations, to finding landfill boundaries and other buried unknown problems. In the past few decades, a variety of non-destructive testing methods have gained in popularity over expensive and time-consuming drilling and digging for environmental projects. Among these, the method of pairing ground penetrating radar (GPR) with electromagnetic (EM) induction instruments is one that shows great promise in significantly reducing survey time and costs.

Subsite Electronics introduces TK RECON Series HDD Guidance System

Subsite Electronics, a Charles Machine Works Company, introduces the TK RECON Series HDD Guidance System. The TK RECON Series offers all the proven benefits of the original TK Series built on a new, advanced-technology base that allows the company to incorporate several performance-enhancing features now, and accept upgraded features in the future.

Montreal-based consultancy completes inspection and leak detection of six 1,200-mm steel watermains and one 1,500-mm PCCP main in Montreal

Since September 2013, GAME Consultants has been paving the way for the next generation of watermain condition assessment tools by using existing tools and working to improve the results with every project. The company’s position is to equip itself with a wide range of tools designed exclusively for use in watermains.

Using technology for a higher purpose

The technologies for inspecting sewer, storm water and watermain pipes are well established and get deployed with confidence by municipalities across Canada when it comes to pipeline rehabilitation or replacement work.

GSSI’s new 350 HS Antenna uses HyperStacking technology to improve performance while meeting GPR emissions limits

GSSI has announced its 350 HS Antenna, which greatly improves the depth and data resolution performance of traditional real time sampling technologies. The 350 HS is designed for use with new digital HyperStacking technology, which allows users to see deeper targets and operate in conditions considered too “noisy” for conventional systems. Easily configurable, the 350 HS antenna is ideal for archaeology, geophysics, and utility locating applications.

Trimble launches new version of its smart water management software to streamline utility field operations

Trimble has announced the latest version of its smart water mapping and work management software—Trimble Unity 3.0. Trimble Unity is a cloud-based, (GIS) centric software-as-a-service (SaaS) solution for smart water management. Version 3.0 includes new features and workflows and also offers an App Builder and new integration capabilities to simplify connecting mobile workers with maps and data from back office enterprise systems.

Prevent leaks and bring lead leaching into compliance with ePIPE

Pipe Restoration Inc., Technologies, LLC, (PRT), a world-leading pipe lining innovator and manufacturer of the patented, proven ePIPE pipe restoration technology, offers the fastest, 2 hour return to service barrier coating that prevents water pipe leaks, as well as bringing lead leaching into compliance. In honor of the United States' Environmental Protection Agency's national Fix a Leak Week, and United Nations' World Water Day on March 22, PRT announces that it is helping to combat the global issue of water conservation and access to clean water with the ePIPE patented leak protection process.

Subscribe to our free newsletter

Get our newsletter

Learn more

“Locatable Rope” from 3M

The Electronic Marker System (EMS) Rope 7700 series uses propriety 3M path marking technology to deliver more accurate and more reliable tracking of underground plastic pipe and fiber optic conduit. Designed as a high performance alternative to the current industry standard solution, the new EMS Rope series is available for use in the electrical utility industry. The EMS Rope Series is also available for gas, telco, wastewater and water utility applications.

Into the void

It’s not uncommon to use ground-penetrating radar (GPR) to map underground utilities, but some municipalities are using it to find, well, nothing at all.

Lead pipes still a problem in Canada

The shocking story of lead contamination in Flint, Michigan may seem like a one-off situation that most of us living in modern housing don’t need to worry about. But after reading with horror and sadness all the coverage of how officials in Flint failed to protect thousands of mostly poor Americans, including children, from ingesting dangerous levels of lead that leached from corroded water pipes, I decided to look at the situation north of the border. (Flint is only a two-hour drive from London, ON) The conclusion? While the lead pipe problem in Canada isn’t as dire as in Flint, admittedly an extreme example, neither should we turn a blind eye to it, because thousands of Canadians (the exact number is impossible to pinpoint) may also be unknowingly drinking lead-contaminated water because they live in older homes where lead pipes and fittings were commonly installed.

B.C. robotics manufacturer working with Seatronics to supply ROV

Seatronics, an Acteon company, and market leaders in the rental and sale of marine electronic equipment, has announced a collaboration with Canadian-based manufacturer, Inuktun Services Ltd. Inuktun has extensive expertise in remote controlled robotic transport and delivery of multi-mission, modular technology used in hazardous environments and confined spaces.

Addressing the challenges of inspecting corrugated metal pipe

Corrugated metal pipe (CMP) is heavily reliant on supporting soil for structural integrity. As such, a condition assessment must include an evaluation of the supporting soil to be considered complete. Previously there was no conclusive and quantifiable way to assess soil condition without damaging the pipe wall – further compromising the structural condition of the pipe.

Subscribe to our free magazine

Get Our Magazine

Paper or Digital delivered monthly to you

Subscribe or Renew Learn more