The Solinst Discrete Interval Sampler is stainless steel, attached to LDPE tubing mounted on a convenient reel. It is pressurized before being lowered to prevent water from entering the sampler until the desired zone is reached. Used to profile open bodies of water and boreholes, and collect discrete samples, the sampler is ideal for obtaining truly representative samples of water below product, LNAPL and DNAPL.
Compact and lightweight, the Solinst Peristaltic Pump is designed for field use. The pump is ideal for vapour sampling or water sampling from shallow wells and surface water. The robust and water-resistant metal case makes it easy to maintain and repair. Simple connection to a 12V power source provides convenient operation. One easy-access control enables reversible flow and various speeds, allowing high or low-flow sampling.
The rugged Solinst Leveloader Gold is a field-ready, water-resistant handheld data transfer unit built for use with the new Levelog-ger Gold water level datalogger. Features include: real time view (ideal for pump tests); scroll-through data; Levelogger setup file integration; increased memory; longer battery life (uses 9V alkaline or lithium); larger LCD screen; ergonomic design; standard connections for USB; RS232; optical and direct read interface cables. Using the Levelogger setup file allows the user to set up Levelogger sampling schedules at the office, and store up to 10 of them to the Leveloader Gold.
The Levelogger Junior is the newest addition to the Solinst levelogger family. It provides a low-cost alternative for measuring groundwater and surface water level and temperatures. Levelogger Junior is compatible with Levelogger Gold software and accessories. It features a five-year battery, accurate clock, memory of 32,000 level and temperature data points. It has an accuracy of 0.1% FS, and comes with a one-year warranty and lifetime calibration.
Designed with non-stretch tape, the Solinst Model 101 water level meter has heat embossed markings every 1/100 feet or millimetre. The stranded stainless steel conductors provide extra strength and protection against corrosion. The Model 101 provides accurate water level measurements in wells and boreholes. Its rugged design is ideal for use in the field. A P6 pressure-proof probe is available. Similar to the P2 probe, the simple design is easy to clean, and hangs straight in wells.
Simple and inexpensive, Model 800 packers inflate with a hand pump and are designed for pneumatic inflation at pressures from 20 to 50 psi (140 to 345 kPa). Available in two sizes, the Model 800 packers are primarily for use in two-inch and four-inch (50 mm and 100 mm) monitoring wells. They can also be used in smooth boreholes and wells with 1.9-inch to five-inch (48.26 to 127 mm) inside diameters.